Non-Shrink Grout


    Construction Construction

Non-Shrink Grout

Cementitious grout for grouting, anchoring or fixing purposes, e.g. base plates, machinery beds, bearing pads, etc. 

Share
Formulation Parts
Portland Cement CEM I   52.5 R 50 - 60
Sand 0.5 – 1.0 mm 15 - 20
Sand 0.25 – 0.5 mm 20 - 25
Aluminum Powder  < 100 µm (premixed with fine sand prior to use) 0.0015 – 0.0020
Deformer 0.1
ELOTEX Flowkit 0.3 – 0.6
Water approx. 18 - 21 %

 

We recommend the following AkzoNobel products for this formulation:

Flowkit
Flowkit 74

Own Formulation

We will be happy to help you with the development of a formulation based on your raw material. Just contact your local AkzoNobel consultant. 

 
Please Note

This starting formulation is intended only as a guide, and as such is suggested in good faith but without guarantee. It is based on our laboratory experience using raw material available in Switzerland or Germany. Raw material from other sources can produce differing results when substituted. We therefore strongly recommend that you undertake your own testing and evaluation to satisfy yourself on the suitability of the formulation for your proposed application even with other suitable AkzoNobel products.